OnePlus 9 and 9 Pro specifications have been confirmed once again

With less than two months left before OnePlus supposedly introduces the 9 Series to the general public, the rumor mill is starting to gain momentum. The specifications sometimes travel around your ears, without it being clear if they are correct. A rumor maker seen as “reliable” confirmed some of the specifications on Saturday.

OnePlus 9 and 9 Pro

According to rumors, OnePlus will introduce the OnePlus 9 series in March: for the first time since the creation of OnePlus, this device series will consist of three phones. At the bottom of the lineup, an OnePlus 9 SE The general public, with the above, the regular OnePlus 9 and finally, one can opt for the OnePlus 9 Pro (more expensive) model. The specifications of the last two OnePlus phones were confirmed on Saturday Digital chat station (Via Weibo in Chinese).

OnePlus 9 and 9 Pro specifications have been confirmed once again

OnLeaks was the first to show us the OnePlus 9 design

The details confirmed by the rumors include the specifications of the screens on high-end smartphones. OnePlus 9 has a 6.55-inch screen with Full HD + resolution and 120Hz refresh rate. A larger 6.78-inch screen is provided for the OnePlus 9 Pro.

The larger screen also has a higher QHD + resolution, but it has something to do with the same 120Hz refresh rate. Finally, AMOLED panels differ in shape: OnePlus 9 has a flat screen, while the 9 Pro panel is rounded on both sides.

3.8 mm is small

The Digital Chat Station further revealed that the OnePlus 9 series screens have a perforated hole with a diameter of only 3.8 mm; This will be the notch hole for these 9 series phones As big as The notch hole on the OnePlus 8 Pro. Speaking of dimensions, the OnePlus 9 and 9 Pro will measure 8.0 and 8.5mm respectively at its thickest point. Why the OnePlus 9 Pro is still thicker is unknown to us – both devices will be charged with the same 4,500 mAh batteries.

See also  Niantic has confirmed the Squirtle Community Day make-up event through its support channels
OnePlus 9 and 9 Pro specifications have been confirmed once again

Earlier, a prototype of OnePlus 9 was leaked

What may explain the difference in thickness between the two OnePlus phones is the speed at which devices can be charged wirelessly. On the OnePlus 9 Pro, this is rumored to be up to 45W, while the OnePlus 9 (non-Pro) with Up to 30W wireless router Can be downloaded. The wired charging speed of both phones will be at the same speed; For this purpose, OnePlus will use 65W charging technology in the 9 and 9 Pro: Warp Charge 65.

Launching in March

Details that remain unconfirmed for now include the camera sensors that OnePlus uses on the 9 and 9 Pro. The OnePlus 9 is expected to include one Main camera 50 mega pixel camera It includes a 20MP wide angle camera and finally a 12MP telephoto camera. To what extent the details will also apply to the most expensive member of the OnePlus 9 series, it is still unknown. There are no known details about the camera in the 3.8mm notch on the front of the phones.

People don’t have to wait long for the specifications, or so is the expectation. Before the end First Quarter OnePlus would like to announce the 9 SE, 9, and 9 Pro alongside the OnePlus Watch – OnePlus’ first Wear OS smartwatch. The prices of the devices are not known yet, and this also applies to the availability of the next three phones. Are you waiting for a device from the Series 9? If so, which device are you particularly looking at? Let us know in the comments at the bottom of the article.

Leave a Reply

Your email address will not be published. Required fields are marked *